Numerical Modelling and Experimental Validation of Twin-Screw Expander

Positive displacement machines have been identified as appropriate expanders for small-scale power generation systems such as Organic Rankine Cycles (ORCs). Screw expanders can operate with good efficiency in working fluids under both dry and two-phase conditions. Detailed understanding of the fluid expansion process is required to optimise the machine design and operation for specific applications, and accurate design tools are therefore essential. Using experimental data for air expansion, both CFD and chamber models have been applied to investigate the influence of port flow and leakage on the expansion process. Both models are shown to predict pressure variation and power output with good accuracy. The validated chamber model is then used to identify the optimal volume ratio and rotational speed for experimental conditions

Aerodynamic analysis of Ampyx’s airborne wind energy system

Besides classical horizontal and vertical axis wind turbines, alternative ways to harvest wind energy are currently being explored. One promising concept is represented by airborne wind energy systems. Different airborne wind energy concepts have been ideated and investigated over the past few decades. The work reported here focuses on the concept being developed by Ampyx Power that basically generates power using a tethered airplane which drives a generator on the ground. The aim of the work reported here is to develop and compare design calculations for such a power plane. In this study a comparison was made between steady and unsteady RANS CFD calculations from SU2 and OpenFOAM. Subsequently, using the data from the CFD calculation two different power prediction models were developed and compared, one using 2D CFD data with the free vortex code AWSM and the other using the same data with a nonlinear lifting line approach to model the power plane in its figure eight flying trajectory. Overall, comparisons show that for all practical angles of attack, as well as a range of flap angles, that 2D CFD results agree extremely well between both solvers. The 3D CFD results show <20% differences on the computed total forces, despite achieving good agreement on the relative force contributions across the power plane. A very good agreement has also been established between the power prediction models

Performance Prediction and Optimisation of Twin-Screw Expander

Positive displacement machines have been identified as appropriate expanders for small scale power generation systems such as ORCs. Screw expanders can operate with good efficiency for working fluids under both dry and two-phase conditions. Detailed understanding of the fluid expansion process is required to optimise the machine design and operation for specific applications, and accurate design tools are therefore essential. Using experimental data for R245fa expansion, both CFD and chamber models have been applied to investigate the accuracy of computed performances. Both models are shown to match experimental power output and mass flowrate with good accuracy. Finally, the validated chamber model is used to evaluate the maximum isentropic efficiency map for the chosen expander. This performance map can be used with ORC optimisation tools to identify deign built-in volume ratio of twin-screw expander and the required rotational speeds to operate at the maximum isentropic efficiency

Evaluation of different methods of determining the angle of attack on wind turbine blades under yawed inflow conditions

As part of the AVATAR and Mexnext projects, this study compares several methods used to derive lifting line variables from CFD simulations of the MEXICO rotor in yawed inflow. The results from six partners within the AVATAR/Mexnext consortium using five different methods of extraction were compared. Overall comparison of the induced velocities at the mid and tip parts of blade shows fairly good agreement between the tested methods, where the derived angle of attack differs within 1°, within the linear range this accounts to ˂ 10% uncertainty on the aerodynamic forces. The presented comparison shows inadequate agreement between the methods for application towards the root

Management and Outcomes Following Surgery for Gastrointestinal Typhoid: An International, Prospective, Multicentre Cohort Study

Background: Gastrointestinal perforation is the most serious complication of typhoid fever, with a high disease burden in low-income countries. Reliable, prospective, contemporary surgical outcome data are scarce in these settings. This study aimed to investigate surgical outcomes following surgery for intestinal typhoid. Methods: Two multicentre, international prospective cohort studies of consecutive patients undergoing surgery for gastrointestinal typhoid perforation were conducted. Outcomes were measured at 30 days and included mortality, surgical site infection, organ space infection and reintervention rate. Multilevel logistic regression models were used to adjust for clinically plausible explanatory variables. Effect estimates are expressed as odds ratios (ORs) alongside their corresponding 95% confidence intervals. Results: A total of 88 patients across the GlobalSurg 1 and GlobalSurg 2 studies were included, from 11 countries. Children comprised 38.6% (34/88) of included patients. Most patients (87/88) had intestinal perforation. The 30-day mortality rate was 9.1% (8/88), which was higher in children (14.7 vs. 5.6%). Surgical site infection was common, at 67.0% (59/88). Organ site infection was common, with 10.2% of patients affected. An ASA grade of III and above was a strong predictor of 30-day post-operative mortality, at the univariable level and following adjustment for explanatory variables (OR 15.82, 95% CI 1.53–163.57, p = 0.021). Conclusions: With high mortality and complication rates, outcomes from surgery for intestinal typhoid remain poor. Future studies in this area should focus on sustainable interventions which can reduce perioperative morbidity. At a policy level, improving these outcomes will require both surgical and public health system advances

Effects of pre-operative isolation on postoperative pulmonary complications after elective surgery: an international prospective cohort study an international prospective cohort study

We aimed to determine the impact of pre-operative isolation on postoperative pulmonary complications after elective surgery during the global SARS-CoV-2 pandemic. We performed an international prospective cohort study including patients undergoing elective surgery in October 2020. Isolation was defined as the period before surgery during which patients did not leave their house or receive visitors from outside their household. The primary outcome was postoperative pulmonary complications, adjusted in multivariable models for measured confounders. Pre-defined sub-group analyses were performed for the primary outcome. A total of 96,454 patients from 114 countries were included and overall, 26,948 (27.9%) patients isolated before surgery. Postoperative pulmonary complications were recorded in 1947 (2.0%) patients of which 227 (11.7%) were associated with SARS-CoV-2 infection. Patients who isolated pre-operatively were older, had more respiratory comorbidities and were more commonly from areas of high SARS-CoV-2 incidence and high-income countries. Although the overall rates of postoperative pulmonary complications were similar in those that isolated and those that did not (2.1% vs 2.0%, respectively), isolation was associated with higher rates of postoperative pulmonary complications after adjustment (adjusted OR 1.20, 95%CI 1.05–1.36, p = 0.005). Sensitivity analyses revealed no further differences when patients were categorised by: pre-operative testing; use of COVID-19-free pathways; or community SARS-CoV-2 prevalence. The rate of postoperative pulmonary complications increased with periods of isolation longer than 3 days, with an OR (95%CI) at 4–7 days or ≥ 8 days of 1.25 (1.04–1.48), p = 0.015 and 1.31 (1.11–1.55), p = 0.001, respectively. Isolation before elective surgery might be associated with a small but clinically important increased risk of postoperative pulmonary complications. Longer periods of isolation showed no reduction in the risk of postoperative pulmonary complications. These findings have significant implications for global provision of elective surgical care. We aimed to determine the impact of pre-operative isolation on postoperative pulmonary complications after elective surgery during the global SARS-CoV-2 pandemic. We performed an international prospective cohort study including patients undergoing elective surgery in October 2020. Isolation was defined as the period before surgery during which patients did not leave their house or receive visitors from outside their household. The primary outcome was postoperative pulmonary complications, adjusted in multivariable models for measured confounders. Pre-defined sub-group analyses were performed for the primary outcome. A total of 96,454 patients from 114 countries were included and overall, 26,948 (27.9%) patients isolated before surgery. Postoperative pulmonary complications were recorded in 1947 (2.0%) patients of which 227 (11.7%) were associated with SARS-CoV-2 infection. Patients who isolated pre-operatively were older, had more respiratory comorbidities and were more commonly from areas of high SARS-CoV-2 incidence and high-income countries. Although the overall rates of postoperative pulmonary complications were similar in those that isolated and those that did not (2.1% vs 2.0%, respectively), isolation was associated with higher rates of postoperative pulmonary complications after adjustment (adjusted OR 1.20, 95%CI 1.05–1.36, p = 0.005). Sensitivity analyses revealed no further differences when patients were categorised by: pre-operative testing; use of COVID-19-free pathways; or community SARS-CoV-2 prevalence. The rate of postoperative pulmonary complications increased with periods of isolation longer than 3 days, with an OR (95%CI) at 4–7 days or ≥ 8 days of 1.25 (1.04–1.48), p = 0.015 and 1.31 (1.11–1.55), p = 0.001, respectively. Isolation before elective surgery might be associated with a small but clinically important increased risk of postoperative pulmonary complications. Longer periods of isolation showed no reduction in the risk of postoperative pulmonary complications. These findings have significant implications for global provision of elective surgical care

Global economic burden of unmet surgical need for appendicitis

Background There is a substantial gap in provision of adequate surgical care in many low- and middle-income countries. This study aimed to identify the economic burden of unmet surgical need for the common condition of appendicitis. Methods Data on the incidence of appendicitis from 170 countries and two different approaches were used to estimate numbers of patients who do not receive surgery: as a fixed proportion of the total unmet surgical need per country (approach 1); and based on country income status (approach 2). Indirect costs with current levels of access and local quality, and those if quality were at the standards of high-income countries, were estimated. A human capital approach was applied, focusing on the economic burden resulting from premature death and absenteeism. Results Excess mortality was 4185 per 100 000 cases of appendicitis using approach 1 and 3448 per 100 000 using approach 2. The economic burden of continuing current levels of access and local quality was US $92 492 million using approach 1 and$73 141 million using approach 2. The economic burden of not providing surgical care to the standards of high-income countries was $95 004 million using approach 1 and$75 666 million using approach 2. The largest share of these costs resulted from premature death (97.7 per cent) and lack of access (97.0 per cent) in contrast to lack of quality. Conclusion For a comparatively non-complex emergency condition such as appendicitis, increasing access to care should be prioritized. Although improving quality of care should not be neglected, increasing provision of care at current standards could reduce societal costs substantially